You simply need to take it out and purchase a new one for your specific model of microwave.Butter Chicken (Murgh Makhani) is one of the most popular curries in the world and yet happens to be one of the easiest! No hunting down hard to find ingredients, this chef recipe that makes the most incredible curry sauce. This should be checked first because it is also the easiest part to replace. If the rollers are worn or missing, or the part that connects to the coupler is worn, it can cause your glass tray not to spin at all. Regardless of which you have, you will want to check for damage. Some roller guides are pronged and sit directly on the coupler and others consist of a circular hoop with rollers. That doesn’t seem like an important role in the process, but it is. The roller guide, however, supports the tray and ensures even turning. The motor turns the coupler that turns the glass tray. This part is probably something you should check first, but probably won’t be. Unfortunately, there is no more conclusive test other than a visual check. If the area where the coupler attaches to the motor is any other shape than a tight “D” then it needs replacement. This means it will not be rotated by the motor and it needs to be replaced. Over regularly use, this “D” shape can turn into an “O” shape from wear. The couple slips onto the motor via a “D” shaped alcove. If the exterior of your coupler does not look damaged, you will still want to remove it and check the connection to the motor. However, depending on your model of the microwave, you may first have to remove the motor. In many models, you can simply pull the coupler up from within the microwave cabinet. However, if a prong is broken off your coupler, it will not be able to turn the tray. The motor turns the coupler and the coupler turns the tray. The coupler is the three-pronged device that sits under your glass tray and does all the heavy lifting. If the drive motor has checked out, you should next look to the coupler. You simply need to remove the mounting screws and unplug two wires in order to replace it. Thankfully, this is not a very in-depth repair. However, if you are unsure that the motor is responsible, you can test it at the terminals with a multimeter. If the motor was grinding, it definitely needs replaced. This part is accessed through the bottom of your microwave and looks like a round disk in the center. If your turntable doesn’t work anymore or made a grinding noise at any point, it is likely a motor problem. In order to rotate the turntable, your microwave uses a drive motor. In order to check all the parts, you will need to unplug the microwave and remove the bottom panel to access everything that you need to. If one fails, then the whole system fails. In order to turn the turntable, there are three parts that all work together. If your turntable has stopped in your microwave, here is how you fix it. Your food may come out hot on one side and cold on the other, which is fixable, but kind of annoying. If you allow a broken turntable to remain non-functional, you will soon find out just how important it is. The turntable is not there to look pretty, it serves and important purpose. This is where the turntable, or rotating glass plate, comes in. While the waveguide in the microwave cabinet directs the heat towards the center of the food, that same food needs to be rotated for efficient coverage. In order to heat food efficiently, your microwaves uses directed heat waves generated from the magnetron.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |